top of page

PUMPS & TANK MIXERS

OEP250_OEF50_Tel_2017-retouche.png
  • On-board electronics: speed variation, reverse direction, flow rate display, timer settings

  • High frequency remote control: flow rate display, rechargeable battery by induction, start/forwards-reverse/stop/speed variation

  • Easy draining, cleaning & maintenance

  • Lobes made from EPDM (sulphur-free and phthalates-free guaranteed)

  • Conforms to EU machine regulations

  • Mechanics 5 year warranty, excluding wear parts

  • OENOFLUX®: flowmeter for counting up/down for all volume, precise and instantaneous reading of the real flow rate

  • 7" colour touch screen: allows the adjustment of the settings directly on the display

  • Barrel filling by electronic pressure sensor: regulation, automatic stop and restart 

  • Automatic motorized butterfly valve: guarantees full impermeability when the pump is shut down 

 

4 MODELS: FLOW RATE FROM 15 TO 600 HL/H

OENOPOMPE® 130: from 15 to 130 hL/h

OENOPOMPE® 250: from 25 to 250 hL/h

OENOPOMPE® 450: from 30 to 450 hL/h

OENOPOMPE® 600: from 100 to 600 hL/h 

Trichter-Zubehoer.jpg
SCHLAUCHPUMPEN-DF.jpg
Schneider logo 3.png

A peristaltic pump is a type of positive displacement pump used for pumping a variety of fluids. The fluid is contained within a flexible tube fitted inside a circular pump casing.

A rotor with a number of “rollers” attached to the external circumference of the rotor compresses the flexible tube. As the rotor turns, the part of the tube under compression is pinched closed thus forcing the fluid to be pumped to move through the tube.

Optional hopper with frequency driven auger (for use under destemmer) available. Comes with Wireless Remote Control and phase converter. 

20161125_135230_resized.jpg

Europa S Evario - Centrifugal pump   12,000L/hr

Centrifugal pump with pre-screen      10,000L/hr

Duplex Evario - Centrifugal pump        5,000L/hr

  • Stainless steel construction

  • Variable speed 0-12,000L/ hour

  • Ideal for filtration, bottling/ canning

  • Transfers maintenance free silicon carbide mechanical seal

  • Continuous operation

  • High efficiency, low noise

  • Stainless steel sieves in suction and pressure

  • Dry-Running, reversible and precise dosing via frequency converter

  • Wireless remote control

  • Made in Germany

k-Phö-Evar-12000-1.jpg

Evario Impeller Pump

Sizes available: 6000L/Hr, 12000L/Hr, 22000L/Hr

They unite the characteristics of a rotary pump and a positive displacement pump into one. The heart of the pump is a flexible wheel(impeller), which is made of an elastomer material called Neoprene and the individual wings of the impeller are strongly bent, due to rotation, against the eccentric plate. On the priming side, the wings spread apart through residual stress. The suction area increases. A vacuum develops, whereby the pump independently self-primes. On the pressure side, the wings are squeezed together. Gaps become smaller and are emptied. 

Ask about the individual model features. 

Schneider SP 02 (2).jpg

Model: SP O2 Evario Worm Pump Model SP

Ideal universal pumps for wineries, fruit juice pressing houses, breweries and distilleries. Entire stone fruit, deberried and non-deberried grape mash, wine, cider, and concentrates are propelled along easily. A variety of different capacities available. 

Ask about the individual model features. 

SP-Evario-Flotation-mit-Thermoschutz-980x790.jpg
Flotation

  • This unit with integrated dosing valves for both air, nitrogen or mix

  • No compressor needed

  • Dosing gelatine directly in tank or with dosing valve

  • Mounted on SP 03 3,000-9,000 l/h

  • Easy to remove that pump can be used for other purpose

  • Made in Germany

KIESEL_Logo.png
flat mash pump.JPG
  • Flat mash pumps FTF are specially constructed for use under destemmers, graters, or mills. 

Kiesel Impeller Pump (Ontario only)

Euro-Machines Impeller Pump Model IP

Dry and self-priming rotary pumps. They unite the characteristics of a rotary pump and a positive displacement pump into one. The heart of the pump is a flexible wheel (impeller), which is made of an elastomer material called Neoprene and the individual wings of the impeller are strongly bent, due to rotation, against the eccentric plate. On the priming side, the wings spread apart through residual stress. The suction area increases. A vacuum develops, whereby the pump independently self-primes. On the pressure side, the wings are squeezed together. Gaps become smaller and are emptied. 

Kiesel mixers_RG_0_web.jpg
ruehr3a.jpg
Tank Mixers

Euro-Machines and Schneider

Powerful light weight mixers. Handy and mobile units for mixing liquids of watery viscosity in wine and champagne, grape juice cellars, distilleries as well as in the whole beverage industry.

Capable of meeting all requirements of the modern cellar economy.

Tank mixer stand.jfif

Tank Mixer Stand

  • 330lb weight capacity

  • 4 Swivel castors, 2 with brakes

  • Hydraulic foot peddle to lift

bottom of page